Server Board Overview Intel® Server Boards S3200SH/S3210SH TPS
Revision 1.3
6
− One 4-pin SATA RAID Key
− One 2-pin intrusion detection
• BIOS
− EFI BIOS
• Power Management
− Support for Power Management of all capable components
− ACPI compliant motherboard and BIOS
− Sleep Switch and dual mode LED indicator
• Manufacturing
− Surface mount technology. Single sided assembly for LC/V board SKUs and
double sided assembly for the LX board SKU
− 6 layer PCB
• Form Factor
− ATX 2.0, 12’’ x 9.6’’, 1U thermally optimized, and SSI TEB Rev 2.11 compatible.
• Universal Serial Bus 2.0 (USB)
− Two external USB ports (located at the rear panel) with an additional internal
header providing two optional USB ports for front panel support
− Supports wake-up from sleeping states S1 and S4 (S3 is not supported)
− Supports legacy keyboard/mouse connections when using a PS2-USB dongle
• LPC (Low Pin Count) bus segment with one embedded device
− Super I/O controller (SMSC* SCH5027D) providing all PC-compatible I/O (floppy,
serial, keyboard, mouse, two serial com ports) and integrated hardware
monitoring.
• SSI-compliant connectors for SSI interface support
• Standard 24-pin SSI front panel, 2x12 main power connector, and 2x4 CPU power
connector
• Fan Support
− 5 general purpose 4-pin fan headers
One 4-pin processor fan header (active heat sink required)
Four 4-pin system fan headers: SYS FAN1, SYS FAN2 and SYS
FAN3 for Intel high density applications to support Intel
®
Server
System SR1530SH; SYS FAN4 is for use in the Intel
®
Entry Server
Chassis SC5299-E
• Diagnostic LEDs to display POST code indicators during boot
• Onboard SATA RAID
− Intel
®
Matrix Storage Technology supports software SATA RAID 0, 1, 10 and 5;
Microsoft Windows
*
driver support only.
The following figure shows the board layout of the LX board SKU. Each connector and major
component is identified by letter (shown in Table 1).
To Next Page
Loading...
