Intel True Scale Fabric 12000 Series - Chassis Viewer Overview; User Authentication

Intel
®
True Scale Fabric Switches 12000 Series
July 2015 User Guide
Doc. Number: G91930 Revision: 005US 13
2.0 Chassis Viewer Overview
Chassis Viewer is Intel
®
’s browser-based device management software. Chassis Viewer
provides the primary management interface for the Intel
®
12000 switches, allowing
the user to perform management, configuration, and monitoring tasks related to IB
networks.
The Chassis Viewer runs on the firmware of the 12300 and each management module
of the 12800 series. The browser must be on a workstation that has IP connectivity to
the LAN port (RJ-45 connector) on the switch.
• To access Chassis Viewer, point a browser to the IP address of the switch.
For a list of supported browsers, please refer to the Intel
®
12000 Release Notes.
• If user authentication is enabled, the User Authentication window shown in
Figure 2-1 is displayed:
— The default user name and password need to be entered:
• User name:
admin
• Password: adminpass
The Chassis Viewer home page is displayed.
The Chassis Viewer manages:
• The switch chassis
• Each director-class leaf module
• Each director-class spine module
• Each director-class management module
• Logging and monitoring functionality
Figure 2-1. User Authentication