Intel
®
True Scale Fabric Switches 12000 Series
July 2015 User Guide
Doc. Number: G91930 Revision: 005US 19
All component Details Headers contain the following buttons:
• Logout
Note: The Logout button is only displayed if the user has set the User Authentication
parameter to Login Enabled through the HTTP Session Configuration submenu. Refer
to Section 3.3.3, “HTTP/CLI Session Configuration” on page 33 for more information.
• Reboot
• View Field Replaceable Unit (FRU) Information
• View Log
• Home (12800 series)
• Help (12800 series)
2.4.2 Module Information Area
The Module Information Area (Figure 2-16) allows the user to view high-level
information for each specific leaf, spine, or management module. The information area
comprises fields that are tied to live data from the selected hardware component as
well as live system information.
The information area has the following button:
Refresh:
Refreshes all fields in the information areas.
2.4.3 Chassis View Component Information Area
The Chassis View Component Information Area (Figure 2-17) allows the user to
monitor important information for each specific hardware component, as well as
important system information. The information area is comprised of two different
fields:
• The white fields allow the user to add or modify applicable general and system
information that is specific to their environment.
• The gray fields are tied to live data from the selected hardware component as well
as live system information.
Figure 2-15. Details Header
Figure 2-16. Module Information Area
To Next Page
Loading...
