Intel True Scale Fabric 12000 Series - HTTP;CLI Session Config Button; HTTP;CLI Session Configuration Window; User Authentication Dropdown List

Intel
®
True Scale Fabric Switches 12000 Series
User Guide July 2015
34 Doc. Number: G91930 Revision: 005US
To modify the HTTP and CLI configurations:
1. From the menu, select Maintenance.
The HTTP/CLI Session Config button is displayed (Figure 3-15).
2. Click HTTP/CLI Session Config.
The HTTP/CLI Session Configuration window is displayed (Figure 3-16).
3. To modify the session time out duration (in seconds), click on the existing
configuration. The row changes to orange.
4. In the HTTP Timeout Duration field, enter the new timeout duration (in seconds).
The default is 0 seconds (i.e., no timeout).
5. In the CLI Timeout Duration field, enter the new timeout duration (in seconds).
The default is 600 seconds.
6. To change the User Authentication parameter, click on the User Authentication
list (Figure 3-17).
7. Select the preferred user authentication method.
• Login Enabled - UserName and Password must be entered, and must match what
is in the database of the local switch.
Figure 3-15. HTTP/CLI Session Config Button
Figure 3-16. HTTP/CLI Session Configuration Window
Figure 3-17. User Authentication Dropdown List