Intel True Scale Fabric 12000 Series - Reset Log Levels; Log System Configurator: Syslog Host Tab; Reset Levels Button

Intel
®
True Scale Fabric Switches 12000 Series
User Guide July 2015
30 Doc. Number: G91930 Revision: 005US
To set up the syslog host:
1. In the Hostname or IP text box, enter either the host name or IP address of the
syslog host where the log files are to be saved.
2. Click the Apply button to save the IP address.
3.2.1.5 Configure Syslog on the Syslog Server
1. Edit the /etc/sysconfig/syslog file and ensure that the -r is included in the
SYSLOGD_OPTIONS. This allows logging from a remote system. For example:
SYSLOGD_OPTIONS="-r -m 0"
2. Type /etc/init.d/syslog restart, and press Enter.
Note: To centralize logging for all switches in an IB fabric, the user can configure each switch
to point to the same syslog server, which has the syslog daemon (syslogd) running.
3.2.2 Reset Log Levels
The Reset Levels button resets the logging levels to their factory default values.
To reset the logging levels:
1. From the menu, select Logging.
The Reset Levels button is displayed (Figure 3-8).
2. Click Reset Levels.
The Reset Levels window is displayed (Figure 3-9).
Figure 3-7. Log System Configurator: Syslog Host Tab
Figure 3-8. Reset Levels Button