Intel True Scale Fabric 12000 Series - Device Tab: Software Module Configurator

Intel
®
True Scale Fabric Switches 12000 Series
July 2015 User Guide
Doc. Number: G91930 Revision: 005US 27
3.2.1.1 Device Tab
The Device tab (Figure 3-5) presents current log level configuration settings for the
following software modules:
• RAM – The circular log buffer contained in memory. To access the contents of this
buffer, use the Chassis Viewer View Log button.
• Syslog – Messages that are sent to the syslog host specified on the Syslog tab.
From this window, the user can change any of the log level settings for a specific
software module by clicking on the Configure button, which displays a configuration
window:
To change any Log Level settings:
1. Click the On-Off check box to the right of the setting.
2. Click the Apply button to save any changes.
The following list describes each of the Log Level configuration parameters.
Figure 3-4. Log System Configurator: Device Tab
Figure 3-5. Device Tab: Software Module Configurator