Intel True Scale Fabric 12000 Series - Trap Control; Configuration File Trap Control Window

Intel
®
True Scale Fabric Switches 12000 Series
July 2015 User Guide
Doc. Number: G91930 Revision: 005US 45
2. Click Trap Control.
The Trap Control window is displayed (Figure 3-35).
3. Select or deselect the desired trap(s).
Note: To generate an immediate trap, click the applicable Gen Trap button.
4. To save settings, click on Apply.
Note: If the trap is not selected, the Gen Trap button will not generate a trap.
The following are definitions for each configuration file trap:
• CfgSrvBackupFailed
The server was instructed to back up a file for a particular slot, which failed.
• CfgSrvSyncError
Synchronization to the slave Management Module failed. The problem should be
resolved and attempted manually.
• CfgSrvGenError
A general error has occurred.
• CfgSrvFileRestored
The configuration files have been restored to a particular slot.
• CfgSrvFileBackedup
The configuration files have been successfully backed up for a particular slot.
• CfgSrvModeDisabled
Figure 3-34. Trap Control
Figure 3-35. Configuration File Trap Control Window