Intel True Scale Fabric 12000 Series - Select Boot Image; Purge Log Confirmation Window; Select Boot Image Button; Boot Image Selection Window

Intel
®
True Scale Fabric Switches 12000 Series
User Guide July 2015
68 Doc. Number: G91930 Revision: 005US
4. Click OK.
5. The message log file is now purged.
3.11.4 Select Boot Image
The Select Boot Image button allows the user to choose an alternative boot image for
the switch. To select a boot image:
1. From the menu, select Maintenance.
The Select Boot Image button is displayed (Figure 3-69).
2. Click Select Boot Image.
The Boot Image Selection window is displayed (Figure 3-70).
By mousing over either radio button in the Boot Image Selection window, the user
can glean additional information about each file, as shown in Figure 3-71.
Figure 3-68. Purge Log Confirmation Window
Figure 3-69. Select Boot Image Button
Figure 3-70. Boot Image Selection Window