Intel True Scale Fabric 12000 Series - Snmp; HTTP Mode Dropdown List; Https Mode Dropdown List

Intel
®
True Scale Fabric Switches 12000 Series
July 2015 User Guide
Doc. Number: G91930 Revision: 005US 35
• User Only Required - According to the local switch database, a valid username
must be entered. A password is not required.
• Login Disabled - Does not require username or password.
• LDAP - Use an LDAP server. If the user name/password validation fails to complete
successfully, check the database of the local switch.
8. To change the HTTP Mode parameter, click on the HTTP Mode list (Figure 3-18).
9. Select Enabled or Disabled.
10. To change the HTTPs Mode parameter, click on the HTTPs Mode list
(Figure 3-19).
11. Select Enabled or Disabled.
12. Click Apply.
3.4 SNMP
The SNMP submenu (Figure 3-20) allows the user to view and modify SNMP trap
configuration information.
Note: The following Chassis SNMP MIBs are provided:
• icsChassisMib
• icsChassisTrapMib
• icsConfigFileTrapMib
• icsIBStatMib
• icsKeyMgmtMib
• icsLogConfigMIB
• icsMasterMib
• icsSmMib
Figure 3-18. HTTP Mode Dropdown List
Figure 3-19. HTTPs Mode Dropdown List