Intel True Scale Fabric 12000 Series - Subnet Manager Control Window

Intel
®
True Scale Fabric Switches 12000 Series
July 2015 User Guide
Doc. Number: G91930 Revision: 005US 71
3. To start the Fabric Manager, click Start.
The system responds by displaying Starting up in the Status box of the Subnet
Manager Control window.
4. To confirm that the Fabric Manager has started, click Refresh.
Once the Fabric Manager is running, the system reports Running in the Status
box and begins to increment the Uptime counter.
5. Click Close.
3.12.1.1 Restarting the Fabric Manager
1. From the menu, click Subnet Manager.
2. Click Control. The Subnet Manager Control window is displayed.
3. To restart the Fabric Manager, click Restart.
The system responds by displaying Shutting Down in the Status box of the
Subnet Manager Control window.
4. To confirm that the Fabric Manager has started, click Refresh.
Once the Fabric Manager is running, the system reports Running in the Status
box and begins to increment the Uptime counter.
5. Click Close.
3.12.1.2 Stopping the Fabric Manager
1. From the menu, click Subnet Manager.
2. Click Control.
The Subnet Manager Control window is displayed.
3. To stop the Fabric Manager, click Stop.
The system responds by displaying Shutting Down in the Status box of the
Subnet Manager Control window.
4. To confirm that the Fabric Manager has shut down, click Refresh.
Once the Fabric Manager has shut down, the system reports Not Started in the
Status box of the Subnet Manager Control window.
5. Click Close.
Figure 3-76. Subnet Manager Control Window