Intel True Scale Fabric 12000 Series - Fabric Manager Control; Accessing the Subnet Manager Control Window; Post Diagnostics Window; Post Diagnostics Results Output

Intel
®
True Scale Fabric Switches 12000 Series
User Guide July 2015
70 Doc. Number: G91930 Revision: 005US
4. Select the test(s) to be run and click Run Tests.
The test results are displayed in the Test Result column (Figure 3-74). Additional
information is posted to the Result-Ext column:
3.12 Fabric Manager Control
This section assumes the user has purchased and activated the embedded version of
the Fabric Manager.
3.12.1 Accessing the Subnet Manager Control Window
The Subnet Manager Control window presents status information relating to the
Fabric Manager and provides a mechanism for starting, restarting, and stopping the
Fabric Manager
.
1. From the Management Module menu, click Subnet Manager.
The Control button is displayed (Figure 3-75).
2. Click Control.
The Subnet Manager Control window is displayed (Figure 3-76).
Figure 3-73. Post Diagnostics Window
Figure 3-74. Post Diagnostics Results Output
Figure 3-75. Subnet Manager Control Button