Intel
®
True Scale Fabric Switches 12000 Series
User Guide July 2015
46 Doc. Number: G91930 Revision: 005US
An event has occurred that has caused the slot mode to be set to disabled. The
user should resolve the error and reset the mode to the proper value for the
affected slot.
Note: The default settings for this window are as shown above. The user should not change
the defaults unless instructed by Technical Support.
3.5.4 Subnet Manager Configuration File
The Subnet Manager Configuration File window allows the user to upload and
download new Intel
®
Fabric Manager embedded subnet manager files, as well as start
and restart all applicable master and standby subnet managers using the new file.
1. From the Chassis View menu (Figure 3-1), select Config File Admin.
The Subnet Manager Config File button is displayed (Figure 3-36).
2. Click Subnet Manager Config File.
The Subnet Manager Configuration window is displayed (Figure 3-37).
3. To download the current configuration file, right-click on the file name in the
Current config file text box, then choose either Save Target As or Save Link As
(depending upon which browser is being used) as displayed in Figure 3-38.
Figure 3-36. Subnet Manager Configuration File
Figure 3-37. Subnet Manager Configuration File Window
To Next Page
Loading...
