Intel True Scale Fabric 12000 Series - System Time Information Window

Intel
®
True Scale Fabric Switches 12000 Series
User Guide July 2015
60 Doc. Number: G91930 Revision: 005US
Note: If using Network Time Protocol (NTP) and host names (instead of IP addresses), DNS
information must first be set up using the CLI command
dnsParamsSet. Remember to
reboot the switch after executing this command.
Note: For detailed information, refer to the Intel
®
True Scale Fabric Switches 12000 Series
CLI Reference Guide.
To use NTP:
1. Click the Use Network Time Protocol? check box (Figure 3-54).
Figure 3-53. System Time Information Window