Intel
®
True Scale Fabric Switches 12000 Series
User Guide July 2015
22 Doc. Number: G91930 Revision: 005US
Note: For a detailed explanation of physical LEDs on the hardware components, please refer
to the Intel
®
True Scale Fabric Switches 12000 Series Hardware Installation Guide.
2.4.5.2 System, Chassis FRU, Power, Fan, and Backplane Tabs
Table 2-1 is a list of the System, Chassis FRU, Power, Fan, and Backplane tabs in the
Chassis View Component Information Area (Figure 2-20).
Figure 2-20.
Chassis View Component Information Area, Showing LEDs and Sensors
Tab
Table 2-1. System, Chassis FRU, Power, Fan, and Backplane Tabs
Tab/Information Description
System Tab
The System tab displays overall system information for the applicable
switch chassis. This information includes the following items:
Out of Band LAN IP
The IP address of the switch. The IP address of the switch can be
changed by the administrator.
Net Mask
The current net mask settings for the Chassis. The net mask of the
chassis can be changed by the administrator.
System Description A read-only textual description of the system.
IB Node Description
Assigned by the administrator, the IB node description is an IB fabric-
applicable name that will be displayed within the Intel
®
Fabric Viewer.
To reset this field to the default setting, click the Field Default
button.
Note: If the IB Node Description field has been changed since the last
reboot of either management module, the next reboot will be treated
as disruptive.
System Uptime
The elapsed time since the master management module was re-
initialized.
System Contact
The textual identification of the contact person and their contact
information for this system, assigned by the administrator.
System Name
The name for the system, assigned by an administrator. One
convention is to use the system's fully qualified domain name.
System Location The location of the system, assigned by an administrator.
Apply Button Saves any changes made by the user in the System tab to memory.
To Next Page
Loading...
