Intel True Scale Fabric 12000 Series - Fabric Manager Configuration; Automatically Starting the Fabric Manager; Set Default Gateway IP Window; Subnet Manager Submenu

Intel
®
True Scale Fabric Switches 12000 Series
July 2015 User Guide
Doc. Number: G91930 Revision: 005US 65
3. Click the Gateway address text box.
4. Type in the correct switch default gateway IP address.
5. Click Apply.
Note: If the DHCP option is selected, no gateway address is necessary.
3.10 Fabric Manager Configuration
Note: This section assumes the user has purchased and activated the embedded version of
the Fabric Manager
.
3.10.1 Automatically starting the Fabric Manager
To enable the Fabric Manager to automatically start at boot time:
1. From the menu, select Subnet Manager.
The Configuration button is displayed (Figure 3-62).
2. Click Configuration.
The Subnet Manager Configuration window is displayed (Figure 3-63).
3. To configure the Fabric Manager to automatically start with each boot, click
Enabled.
Note: If the user wants to manually activate the Fabric Manager, click Disabled.
Figure 3-61. Set Default Gateway IP Window
Figure 3-62. Subnet Manager Submenu
Figure 3-63. Subnet Manager Configuration Window