Intel
®
True Scale Fabric Switches 12000 Series
User Guide July 2015
32 Doc. Number: G91930 Revision: 005US
2. Click Firmware Update.
The Firmware Update window is displayed (Figure 3-12).
3. In the Select Target Slot column, select the hardware component to change its
firmware.
Note: If there are multiple modules of the same type, the user can select all slots that apply.
4. In the Firmware Update Package: text box, use the Browse... button to locate
the path to the alternate firmware file.
Note: Before using the Browse... button, make certain that the browser is tied to an FTP
server where the firmware files reside (i.e., if the file(s) does not reside on a local
computer).
5. To have the new image become active after the next reboot, make certain that the
box(es) in the Boot? column are checked.
6. Click the Update Firmware button.
3.3.2 LDAP Configuration
The lightweight directory access protocol (LDAP) configuration feature allows the user
to set and configure authentications for the switch. The LDAP service resides on a
server that has access to a usercode and password database.
On the 12000 switches with LDAP enabled, when a user attempts to login to either
Chassis Viewer or the CLI, the LDAP client intercepts the login attempt and rather than
authenticating internally, encrypts and packages the information in an LDAP packet and
sends it to a pre-configured LDAP server over TCP/IP (i.e., the out-of-band LAN). The
Figure 3-11. Firmware Update Button
Figure 3-12. Firmware Update Window
To Next Page
Loading...
