v240M – Marine Satellite Communication System
30
Figure 18. Remove Cable Ties and Rope in Antenna Package
Figure 19. Remove Two Brackets on both sides of CL Arm
Figure 20. Remove M16x3 Bolts on the Pedestal
Remove the two brackets on each side of the cross level arm.
Remove the M16 x 3 bolts that hold down the pedestal.
Reector and Pedestal Assembly
Dismantling the Antenna Package
For the Antenna Package, the installer should remove ties and rope prior to
dismantling the pedestal.
Remove three M16 Hex bolts.
To Next Page
Loading...
Need help?
General
