Intellian v240M - Ku Module Assembly

v240M – Marine Satellite Communication System
38
Now, insert the Ku Module Support Frame into the hole of Reector shown in the gure 34.
While inserting the frame, be careful not to damage the Waveguide.
Ku Module Assembly
Dismantling the Ku Module from the Radome Package
For the Ku Module Assembly, please take out the Ku Module from the Radome Package
(Crate 1). Figure 32 shows inside the Radome Package as a reference.
Assembling the Waveguide
Before inserting the Ku Module Support Frame into the Reector, place the O-Ring into the
groove on the Waveguide (located on the end of Ku Module Support Frame) as shown in
gure 33.
Figure 32. Radome Package
Figure 33. Assemble O-Ring
Figure 34. Insert Ku Module Support Frame
Ku Module Package Box
Ku Module Support Pipe