v240M – Marine Satellite Communication System
90
Edit Satellite Information
Edit satellite
Edit longitude & name
Edit sat MODE
Satellite MODE
Setup mode
SETUP MODE ?
4
YES NO
1. Press the LEFT arrow key to move the cursor to YES and press the OK key to enter SETUP
mode.
+ANTENNA
4
+SATELLITE
+SYSTEM +INSTALLATION
2. Press the RIGHT arrow key to move the cursor to SATELLITE and press the OK key to enter it.
+LOAD SAT.
4
+EDIT SAT.
+ADD SAT. +CHECK NID
3. Press the RIGHT arrow key and the OK key to enter EDIT SAT. MODE.
C
EDIT SATELLITE
[1] C ASIA6AH 125.0E
KU
EDIT SATELLITE
[1] KU KOREA6 116.0E
4. Press the UP and DOWN arrow keys to select the satellite that you wish to edit and press
the OK key to edit the selected satellite.
LONGITUDE SAT.TYPE
125.00E C
5. Edit the satellite orbit position, LONGITUDE and satellite TYPE C or KU.
EDIT NAME SELECT LOCAL
ASIA6AH 5150MHz
6. Edit the satellite name and select local frequency.
Depending on the selected SAT and TYPE,
C : Select only 5150MHz.
KU: Select the LNB local frequency.