93
OPERATION INSTRUCTION
SETUP MODE ?
4
YES NO
1. Press the LEFT arrow key to move cursor to YES and press the OK key to enter SETUP
mode.
+ANTENNA
4
+SATELLITE
+SYSTEM +INSTALLATION
2. Press the RIGHT arrow key to move cursor to SATELLITE and press the OK key to enter it.
+LOAD SAT. +EDIT SAT.
4
+ADD SAT. +CHECK NID
3. Press the DOWN arrow key and the OK key to enter the ADD SAT. menu.
LONGITUDE S AT.TYPE
125.00E C
4. Edit the satellite orbit position, LONGITUDE and satellite TYPE C or KU.
EDIT NAME SELECT LOCAL
ASIA6AH 5150MHz
5. Edit the satellite NAME and select the local frequency.
DVB VERIFY SKEW OFFSET
DVB DECODE +00.0
6. Edit the satellite DVB VERIFY* and SKEW OFFSET
DVB VERIFY will only be activated and applied when the DVB mode of TRACKING SIGNAL
is used. Press the UP and DOWN arrow keys to select DVB VERIFY and press the OK key
to set the parameter.
Addition of Satellite Information
DVB verify method
Add sat MODE
Set longitude & name
Setup mode
Satellite MODE
Set LNB local frequency
DVB VERIFY*
• AGC – use signal level for satellite tracking.
• DVB Lock – use DVB Lock for satellite tracking.
• DVB Decode – use DVB Decode for satellite tracking.
• DSS Decode – use DSS Decode for satellite tracking.
To Next Page
Loading...
Need help?
General
