Interacoustics OtoRead - USB Connection from Cradle; Wireless Connection; Menu Structure

D-0116684-B – 2020/03
OtoRead™ - Instructions for Use - US Page 38
3.16.2 USB connection from cradle
Plug the USB-A connector into an available USB port on the computer and the Micro-USB connector into the
port found on the back of the cradle. Ensure that the OtoRead
TM
is correctly seated in the cradle.
3.16.3 Wireless connection
For a wireless connection to the computer, ensure that the OtoRead has been correctly paired. From the
Main Menu screen press the UP key to enter the device connection screen. Press the LEFT or
RIGHT key to connect. Upon successful connection the device screen will display “CONNECTED”.
Refer to the OtoRead
TM
Module & Auto Print Instructions for Use for further instructions.
3.17 Storing results in HearSIM
TM
and OtoAccess®
Results from screening protocols (DP 2s, DP 4s, TE 32s, TE 64s) can be stored and viewed in HearSIM
TM
and OtoAccess®
TM
. For further information, consult the HearSIM
TM
and OtoAccess®
TM
manuals.
NOTE: test data from clinical protocols will be deleted during the transfer process and will not be stored in
either database. To store these data, refer to the OtoRead Module manual.
3.18 Changing instrument settings
3.18.1 Menu Structure
The OtoRead
TM
allows the user to change many of the instrument's settings or functions.
For a better understanding as to which menu you are currently in,
the menu number or name can be found in the upper left corner of
the screen.
Refer to section Menu structure for an overview of the settings in
each menu.