Interacoustics OtoRead - Connecting the Neckstrap to the Otoread

D-0116684-B – 2020/03
OtoRead™ - Instructions for Use - US Page 13
2.4.5 Connecting the neckstrap to the OtoRead
TM
The provided neckstrap can be connected to the OtoRead
TM
for easy transportation and handsfree testing.
To connect the neckstrap:
1. Insert the loop of the neckstrap into the hole on the
back of the OtoRead
TM
and push the loop through until
it comes out the hole on the top of the OtoRead
TM
.
2. Thread the necktrap through the loop.
3. Pull the neckstrap to secure it in place.