Chapter 4: Web configuration
NS3552-8P-2S-V2 User Manual 63
• Click Reset to undo any changes made locally and revert to previously saved
values.
Web firmware upgrade
Update the industrial managed switch firmware using the Firmware Upload page.
To open the Firmware Upload page:
1. Click System > Web Firmware Upgrade. The Firmware Upload page appears.
2. Click the Browse button on the main page. The file selection menu to choose
firmware appears.
3. Select the firmware file and then click Upload. The Software Upload Progress
displays the file with upload status.
4. After the software is uploaded to the system successfully, the following screen
appears. The system loads the new software after reboot.
Note: DO NOT Power OFF the industrial managed switch until the update progress is
completed.
Note: Do not quit the Firmware Upgrade page without clicking the OK button after the
image is loaded. Otherwise, the system won’t apply the new firmware and the user has
to repeat the firmware upgrade process.
Save startup configuration
This function ensures that the current active configuration can be used after the next
reboot.
To Next Page
Loading...
Need help?
General
