Chapter 1 — Replacing Parts
12 CV30 Fixed Mount Computer Service Manual
I e
6 Lift the display frame assembly away from the CV30 base and
disconnect the display flex cable and the inverter PCB harness.
7 Insert the new display frame assembly and connect the display flex cable
and the inverter PCB harness.
8 Make sure the inner surface of the touch panel and the display are dust
free and have no fingerprints before installing the touch screen. Use the
cloth and cleaning solution if you need to clean any surfaces.
Screw
(4 places)
Display
frame
assembly
Display
frame
assembly
Flex
cable
Inverter
PCB
harness
To Next Page
Loading...
