Intermec EasyCoder F2 – Installation & Operation Ed. 216
Chapter 3
1
/. Type and quantity may
vary, or labels may be omitted,
depending on area of distribu-
tion.
Installation
Unpacking
Before you install the printer, examine the delivery for possible
damage or missing parts:
• Open the box and lift the printer out.
• Check that the printer has not been visibly damaged during
transportation. Keep the packing materials in case you need to
move or reship the printer.
• The label on the printer’s rear plate gives the voltage, the part
number and the serial number.
• Check that any options you ordered are included.
• Check that all the accessories are included in the delivery.
In addition to any separately ordered options, the box should
contain:
- Intermec EasyCoder F2 printer
- Set of Quick-Load Guides
- Adapter for 3” paper roll core (only in models fi tted with
a rotating paper supply spool)
- Power cord (at least one depending on model)
- Quality check card
- Short strip of labels
1
- Cleaning card
- User’s Guide (multilingual)
- Installation & Operation manual
• Check that the power cord is appropriate for the local standard. The
printer works within 100 – 240 V AC, 50 – 60 Hz.
If the printer has been damaged in any way during transportation,
complain to the carrier immediately.
If the delivery is incorrect or any parts are missing, report it
immediately to the distributor.
European type US/Canadian type GB type
230V mains plug 115V mains plug 230V mains plug
To Next Page
Loading...
Need help?
General
