Intermec EasyCoder F2 – Installation & Operation Ed. 2 39
Chapter 5 Paper Load
External Supply
This diagram shows the path of the paper web from an external supply. In case of the standard
paper guide ring, it is recommended to turn it to vertical position for better guiding of the web.
The EasyCoder F2 can print on labels, tickets, tags, and paper strip
in various forms. This chapter describes the case the paper supply is
placed behind the printer, usually in the form of fan-folded tickets
and tags. External supply can be used in connection with tear-off
operation – preferably with Quick-Load.
External supply can be used with both short and long side doors and
there is no need to remove the paper roll hanger.
When using an external paper supply, take care to protect the paper
from dust, dirt or other foreign particles, that can impair the printout
quality or cause unnecessary wear to the printhead.
Direct thermal paper is more or less sensitive to heat, direct sunlight,
moisture, oil, plasticizers, fat, and other substances, depending on
brand and quality and should be protected accordingly.
1
To Next Page
Loading...
Need help?
General
