Intermec EasyCoder F4 Installation & Operation Manual

Intermec EasyCoder F2 – Installation & Operation Ed. 2 25
Chapter 3 Installation
Controls and Indicators, cont'd.
Beeper
The beeper notifi es the operator when an error has occurred and
acknowledges that a key has been pressed. The Intermec Fingerprint
programming language allows the key acknowledge signal to be
turned off. The frequency and duration of the signal can be specifi ed
at will. Thus, it is possible create different signals for different
conditions or even to make the printer play simple melodies!

Intermec EasyCoder F4 Specifications

General

Brand	Intermec
Model	EasyCoder F4
Category	Printer Accessories
Language	English