Intermec IF30

Chapter 1 — Getting Started
IF30 Fixed Reader User’s Manual 13
Configure the DNS settings as needed:
5 Press the left arrow key to return to the main reader
configuration menu.
6 Press the down arrow key to select Save Configuration and
then press Enter. The new settings are saved.
7 Press the down arrow key to select Reboot and then press
Enter. The IF30 reboots. When the boot process is finished,
you see “Starting system…” at the bottom of the
HyperTerminal screen.
8 Disconnect the null-modem cable and AC power cable from
the IF30.
Hostname
Hostname for this IF30. The default is IF30 pre-
pended to the serial number of the unit.
This can be a simple hostname or a fully qualified
domain name (FQDN). If this device obtains its IP
address via DHCP, this parameter is also sent to the
DHCP server. If the DHCP server supports it, this
field will be used for dynamic DNS (DDNS) updates.
DNS
Address 1
IP address of a domain name server that the IF30 uses
to resolve DNS names.
DNS
Address 2
IP address of a domain name server that the IF30 uses
to resolve DNS names if the DNS server at DNS
Address 1 is not responding.
DNS
Suffix 1
Domain name suffix that will be appended to DNS
names that cannot be resolved.
DNS
Suffix 2
Domain name suffix that will be appended to DNS
names that cannot be resolved either by themselves or
using DNS suffix 1.