Chapter 3: Wiring
3.1 Wiring the prox.pad plus Unit...........................3-1
3.1.1 Wiring the AUX Relay for Use as Alarm
Shunt .........................................................................3-1
3.1.1.A Wiring the Alarm Shunt Relay...........3-1
3.1.2 Wiring the AUX Relay for Use as Forced
Door...........................................................................3-3
3.1.2.A Wiring the Forced Door Relay ...........3-3
3.1.3 Wiring the AUX Relay for Use as
Propped Door..........................................................3-5
3.1.3.A Wiring the Pr opped Door Relay........3-5
3.1.4 Wiring the Door Contact Input...................3-7
3.1.5 Wiring t he REX Switch (Request to Exit) ..3-9
3.1.6 Wiring the Main Relay..................................3-11
3.2 prox.pad plus Communications ........................3-13
3.3 Networking Multiple prox.pad plus Units
Together .......................................................................3-14
3.4 Testing the prox.pad plus ...................................3-16
3.4.1 Testing the Controller/Keypad....................3-16
Chapter 4: Programming
4.1 Programming Overview .....................................4-1
4.1.1 Programming from the Keypad..................4-1
4.1.1.A Master Code (User #1) ........................4-1
4.1.1.B Supervisor Code (user #2) ..................4-2
4.1.1.C Master Code and Supervisor Code
Special Features..................................................4-2
4.1.1.D prox.pad plus Default Settings ..........4-3
4.1.1.E Resetting the Master C ode and
System Defaults Only .......................................4-5
4.1.1.F Erasing Entire Memory/Resetting
System Defaults..................................................4-6
Table of Contents
iv prox.pad plus Install/Program. Manual, PPP, D2
To Next Page
Loading...