Parameters
6
Par. Function Page No.
P-25 Analog Output Function Select 26
P-26 Skip Frequency Hysteresis Band 28
P-27 Skip Frequency Centre Point 28
P-28 V/F Characteristic Adjustment Voltage 28
P-29 V/F Characteristic Adjustment Voltage 28
P-30 Start Mode, Automatic Restart, Fire Mode Operation 27
P-31 Keypad Start Mode Select 27
P-32 Index 1: Duration 29
Index 2: DC Injection Mode 29
P-33 Spin Start 29
P-34 Brake Chopper Enable (Not Size 1) 29
P-35 Analog Input 1 Scaling / Slave Speed Scaling 25
P-36 Serial Communications Configuration 32
P-37 Access Code Definition 26
P-38 Parameter Access Lock 26
P-39 Analog Input 1 Offset 25
P-40 Index 1: Display Scaling Factor 29
Index 2: Display Scaling Source 29
P-41 PI Controller Proportional Gain 30
P-42 PI Controller Integral Time 30
P-43 PI Controller Operating Mode 30
P-44 PI Reference (Setpoint) Source Select 30
P-45 PI Digital Setpoint 30
P-46 PI Feedback Source Select 30
P-47 Analog Input 2 Signal Format 25
P-48 Standby Mode Timer 30
P-49 PI Control Wake Up Error Level 30
P-50 User Output Relay Hysteresis 25
6.2.3. Advanced Parameters
Par. Function Page No.
P-51 Motor Control Mode 31
P-52 Motor Parameter Autotune 31
P-53 Vector Mode Gain 31
P-54 Maximum Current Limit 30
P- Motor Stator Resistance 31
P-56 Motor Stator d-axis Inductance (Lsd) 31
P-57 Motor Stator q-axis Inductance (Lsq) 31
P-58 DC Injection Speed 29
P-59 DC Injection Current 29
P-60 Motor Overload Management 34
To Next Page
Loading...
Need help?
General
