INVT EC160

User manual of EC160 elevator intelligent integrated machine Installation and wiring
24
encoder
6 CN8
Terminal for parallel
connection or group
control communication
CAN communication
7 CN9
Terminal for
asynchronous master
encoder
Apply to DC12V, push-pull or open collector
encoder
8 CN2
Terminal only for
manual operation
Use specific cables when connecting with
computer
9
CN1
(drive board)
Main circuit terminals See 4.2.1 for the terminals arrangement.
4.2 Terminals of main circuit
4.2.1 Terminal arrangement
Figure 4-3 Terminals of main circuit (4kW~15kW)
Figure 4-4 Terminals of main circuit (18.5kW~30kW)
4.2.2 Function instruction
Name Function
R, S, T
3-phase power input terminals
(+), (-)
DC bus positive and negative poles
(+), PB
Wiring terminals of braking resistor
U, V, W
3-phase AC output terminals