INVT EC160 User Manual

User manual of EC160 elevator intelligent integrated machine Function parameters
73
Chapter 6 Function parameters
6.1 Original debugging interface
【Monitoring
password input】
00000000
【main menu】
A system control
B fault record
C language selection
D parameters setting
inquiry
E password setting
F system autotuning
G data management
H system information
The monitoring password can only enter into A, B, E and H in the main menu. After the entry of E,
only the monitoring interface password can be modified.
If it is necessary to shift into the other modes after password entering, power off and enter again. After
inputting the monitoring password, pressing ESC can shift into debugging or factory mode.
【Monitoring
password input】
00000000
【Debugging
password input】
00000000
The original value of monitoring password and debugging password is 00000000.
6.2 System monitoring
6.2.1 System monitoring---calling and running state
6.2.1.1 Calling state
After entering into the calling and running state, move the cursor into the called floor number, press
ENT to record the car calling and press DOWN to enter the lower button and press UP to enter the
upper button.
【main menu】
A system control
B fault record
C language
selection
D parameters setting
inquiry
【system control】
[1] calling and
running state
[2] random running
[3] drive state
[4] main controller
[5] car controller
Auto opening
Floor: 1 0mm/s
Height: 0mm
Leveling distance: 100mm
1234567890 1234567890
↑
↓
1234567890 1234567890
After input
correct password

INVT EC160 Specifications

General

Brand	INVT
Model	EC160
Category	Control Systems
Language	English