INVT GD270-090-4 - Page 175

Goodrive270 series VFD for fan and pump Function parameter list
-165-
Function
code
Name Description Default
Modify
26: Rotational speed (bipolar, 0±Speed
corresponding to max. output frequency)
27: Value set through Ethe
rCAT/PROFINET
communication (0
±1000)
28: C_AO1 (Set P27.00 to 1. 0
±1000)
29: C_AO2 (Set P27.00 to 1. 0
±1000)
30: Rotational speed (0
±Twice the motor rated
synchronous speed)
31: Output torque
32: PID1 output
33: PID2 output
34: PID1 reference value
35: PI
D1 feedback value
36: PID2 reference value
37: PID2 feedback value
38±47: Reserved
P06.17
AO1 output lower
limit
Used to define the relationship between the
output value and analog output. When the output
va
lue exceeds the allowed range, the output
uses the lower limit or upper limit.
When the analog output is current output, 1mA
equals 0.5V.
In different cases, the corresponding analog
output of 100% of the output value is different.
10V (20mA)
0.0% 100.0%
AO
P06.17
setting range: -300.0%±P06.19
P06.18
setting range: 0.00V±10.00V
P06.19
setting range: P06.17±300.0%
P06.20
setting range: 0.00V±10.00V
P06.21 setting range: 0.000s±10.000s
0.0% ƻ
P06.18
AO1 output
corresponding to
lower limit
0.00V ƻ
P06.19
AO1 output upper
limit
100.0% ƻ
P06.20
AO1 output
corresponding to
upper limit
10.00V ƻ
P06.21
AO1 output filter
time
0.000s ƻ
P06.22
AO0 output lower
limit
-
300.0%±P06.23 0.0% ƻ
P06.23
AO0 output
0.00V±10.00V
0.00V
ƻ