INVT GD270-090-4 - P07 group-Human-machine interface

Goodrive270 series VFD for fan and pump Function parameter list
-166-
Function
code
Name Description Default
Modify
corresponding to
lower limit
P06.24
AO0 output upper
limit
P06.35
±300.0% 100.0% ƻ
P06.25
AO0 output
corresponding to
upper limit
0.00V
±10.00V 10.00V ƻ
P06.26
AO0 output filter
time
0.000s
±10.000s 0.000s ƻ
P06.27±
P06.31
Reserved
P06.32
Reserved
0±65535
0
ƽ
P06.33
Detection value for
frequency being
reached
0
±P00.03 1.00Hz ƻ
P06.34
Frequency reaching
detection time
0
±3600.0s 0.5s ƻ
P07 group²Human-machine interface
Function
code
Name Description Default
Modify
P07.00 User password
0
±65535
When you set the function code to a non
-zero
number, password protection is enabled.
If you set the function cod
e to 00000, the
previous user password is cleared and password
protection is disabled.
After the user password is set and takes effect,
you cannot enter the parameter menu if you
enter an incorrect password. Please remember
your password and save it in a s
ecure place.
After you exit the function code editing interface,
the password protection function is enabled
within 1 minute. If password protection is
enabled,
"0.0.0.0.0" is displayed when you
press the
PRG/ESC key again to enter the
function code editing interface. You need to enter
the correct user password to enter the interface.
0 ƻ