EasyManua.ls Logo

INVT Goodrive 200A

INVT Goodrive 200A
162 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Goodrive200A inverters Function parameters
85
Function
code
Name Detailed instruction of parameters
Default
value
Modify
Setting range of P11.05:
0x00~0x11
LED ones:current limit
0:Invalid
1:Always invalid
LED tens:overload alarm
0:Valid
1: Invalid
Setting range of P11.06: 50.0~200.0%
Setting range of P11.07: 0.00~50.00Hz/s
P11.08
Overload
pre-alarm of
the
motor/inverte
r
The output current of the inverter or the motor is
above P11.09 and the lasting time is beyond
P11.10, overload pre-alarm will be output.
Setting range of P11.08:
Enable and define the overload pre-alarm of the
inverter or the motor.
Setting range: 0x000~0x131
LED ones:
0:Overload pre-alarm of the motor, comply with
the rated current of the motor
1:Overload pre-alarm of the inverter, comply with
the rated current of the inverter
LED tens:
0:The inverter continues to work after underload
pre-alarm
1:The inverter continues to work after underload
0x000
P11.09
Overload
pre-alarm
test level
G:
150%
P:
120%
P11.10
Overload
pre-alarm
detection
time
1.0s

Table of Contents

Related product manuals