25
Chapter 3: Operation
Control Center Menu Bar Features
File
Download Firmware Allows the user to download the lat-
est rmware version for the FlexJet.
See the section Downloading Firm-
ware in the Routine Maintenance
chapter for more information.
Send Plot File Print a PLT or PLX le.
Exit Exit the Control Center.
Communications
Settings Select the COM port and baud rate
to match the printer.
Send Command Permits advanced users to manually
enter commands.
Automatic Buffer Disables Buffer Close Timer. Improves
Closing communications on some systems.
Tools
Aux Sensor Controls the bottom Paper Out
sensor on new FlexJets or the Cover
Sensor on old FlexJets.
Cartridge Calibration Displays tools to adjust print
cartridge alignment. See Routine
Maintenance for more details.
Size Calibration Allows adjustment of the size cali-
bration settings. See Routine Main-
tenance for more details.
About Your FlexJet Displays license information for ma-
chines with upgraded print heads.
FlexJet Licensing Sets the license key code to enable
inactive print heads in machines
pre-wired for expansion. Requires
rmware version 368.x or greater.
Help
About Displays Control Center version
information.
To Next Page
Loading...
