To Next PageTo Next Page
Need help?Do you have a question about the IPSO PS40 and is the answer not in the manual?
General| Brand | IPSO |
|---|---|
| Model | PS40 |
| Category | Motherboard |
| Language | English |
Overview of the PS40 programmer's capabilities and operation.
Details on initializing the machine's technical characteristics and options.
Instructions for setting up custom washing programs step-by-step.
How to select, start, and monitor washing programs.
Accessing and performing technical tests on the machine's functions.
Step-by-step guide to configuring machine parameters before programming.
Explanation of heating system options: modulation or no modulation.
Configuration of liquid soap injection pumps and supplies.
Using the STOP key as an emergency switch in operating mode.
Entering and selecting the desired program number for programming.
Setting the duration of drum movement or action time.
Configuring heating control, enabling or disabling it.
Configuring the liquid soap supply and desired injection.
Setting the dwell time or stop time for a program segment.
Selecting specific water inlet valves for the program.
Selecting the water level for the program.
Setting the washing time in minutes and seconds for a program part.
Setting the revolutions per minute for washing movements.
Activating or deactivating water level control during the program.
Setting the desired water temperature for the wash.
Setting up the soaking function for the wash program.
Selecting the source program to be copied.
Selecting the destination program number for the copy.
Listing and explaining various error codes displayed by the machine.
