CAUTIONS FOR INSTALLATION
Avoid the following areas when installing the machine
• Areas subject to high temperatures or high
humidity
• Areas exposed to direct sunlight
• Areas where water or other liquids are
easily spilled on the machine
• Areas subject to excessive vibration or
unstable surfaces
• Areas exposed to direct cold air
• Areas subject to low temperatures
• Areas subject to a lot of dust or dirt
• Areas with large voltage fluctuations
• Areas where the scale is not level
Level adjustment
• Always ensure that the machine is level. If the machine is not level, weighing may not be accurate.
• Adjust the machine to a level position using the four level adjustment feet located on the button of
the machine, until the bubble is completely centered in the round level indicator.
6 INS-100 Service Manual No. 085-6692-09
To Next Page
