Chapter 1: BEFORE USE
Uni-3 User’s Manual 1-11
1.8 STARTING PROCEDURES
1.8.1 TURNING ON THE POWER
1.
Push down the "I” side of the Power Switch to
turn on the power.
2.
The “Clock Check” screen is displayed.
Check that displayed date and time agree
with the current date and time, and press the
[ENTER] button on the key pad to proceed to
the next step.
Note: Refer to the “Date/Time” menu in Adjustment
Mode when changing date or time.
3.
The initial screen is displayed.
Note: The contents of the initial screen may differ
depending on the settings on your machine.
1.8.2 ZERO ADJUSTMENT
1.
If the “ZERO” indicator does not appear in the
display, press the [ZERO] key.
2.
The “ZERO” indicator lights up and the
weight value becomes zero.
1.8.3 GETTING BACK TO THE INITIAL SCREEN
1.
To get back to the initial screen from a Menu
selection screen, press the [Mode] button” at
the key pad.
2.
The initial screen is displayed.
Note: The contents of the initial screen may differ
depending on the settings on your machine.
To Next Page
Loading...
Need help?
General
