ISHIDA Uni-3 - 2.3.7 ISSUING RECEIPTS BY DIFFERENT OPERATORS

Chapter 2: OPERATION MODE
2-10 UNI-3 User’s Manual
2.3.7 ISSUING RECEIPTS BY DIFFERENT OPERATORS
1.
Ensure that the initial screen is displayed.
2.
Enter a PLU number and press the [PLU] key
on the keypad.
Note: If “ZERO” is not indicated on the screen, press
[0] on the keypad.
EXAMPLE PLU No.1(weighing product)

3.
The designated PLU screen is displayed.
4.
Put the product on the weighing platter.
5.
Press an operator key.
EXAMPLE Operator “BETTY”
The subtotal screen for the designated
operator is displayed.
6.
Press [Mode] key to return and enter the
PLU number.
EXAMPLE PLU No.101(fixed price
product)
The designated PLU screen is displayed.
7.
Press an operator key.
EXAMPLE Operator “BETTY”
The subtotal screen for the designated
operator is displayed.