ISHIDA Uni-3 User Manual

Chapter 2: OPERATION MODE
UNI-3 User’s Manual 2-1
OPERATION MODE
2.1 OPERATION MODE ENTRY / EXIT
1.
Ensure that the initial display is appearing.
Note: The contents of the initial display may differ
depending on the settings on your machine.
2.
Enter “2000” using the numerical keypad and
press the [Mode].
The “Adjustment Mode” display appears.
Note: To exit the Adjustment Mode, just press the
[Mode] key.
2

ISHIDA Uni-3 Specifications

General

Brand	ISHIDA
Model	Uni-3
Category	Scales
Language	English