Chapter 4: PROGRAM MODE
4-12
UNI-3 User’s Manual
4.3 OPERATOR DATA
1.
Ensure that the “Program Mode” display is
appearing.
2.
Press [↓] twice to call up the “Operators”
display.
Press [ENTER] to call up the lower level menu.
3.
The “Operator” display appears.
Enter the PLU number and press [PLU] key
to call up the desired Operator data.
4.
If a non-registered item has been called, the
confirmation screen is displayed.
Press [Enter] to continue, or [Esc] to go back.
5.
The “Operator / Detail” screen is displayed.
To register the operator name, press [Edit].
6.
The Operator / Detail Edit screen is displayed
for the designated operator number.
Edit text according to the procedure
described in Appendix “Text Editing”.
To Next Page
Loading...
Need help?
General
