ISHIDA Uni-3 User Manual

Chapter 4: PROGRAM MODE
UNI-3 User’s Manual 4-13
.
To finish the editing, press [Enter].
8.
Press [↓] to call up the “Password” display
and set a password,
Enter the 4-digit numerical value and press
[Enter].
9.
Press [Mode] to finish the editing.
10.
The confirmation screen is displayed.
To confirm changes, press [Enter].
To undo changes, press [Esc].
or
11.
The edited data has been registered.

ISHIDA Uni-3 Specifications

General

Brand	ISHIDA
Model	Uni-3
Category	Scales
Language	English