ISHIDA Uni-3 - Page 23

Chapter 2: OPERATION MODE
UNI-3 User’s Manual 2-11
8.
Now, the operator has changed from
“BETTY” to “JACK”.
Press [Mode] key to return and enter the
PLU number.
EXAMPLE PLU No. 1(weighing product)
The designated PLU screen is displayed.
9.
Put the product on the weighing platter. Press an operator key.
EXAMPLE Operator “JACK”
The subtotal screen for the designated
operator is displayed.
10.
Now, “BETTY” is back again.
Press [Mode] key to return and enter the
PLU number.
EXAMPLE PLU No. 201(weighing fixed
price product)
 
The designated PLU screen is displayed.