ISHIDA Uni-3 - 4.2 PLU DATA; P01 PLU; SALE1

Chapter 4: PROGRAM MODE
4-2 UNI-3 User’s Manual
4.2 PLU DATA
1.
Ensure that the “Program Mode” display is
appearing.
2.
Press [↓] to call up the “PLU” display.
Press [ENTER] to call up the lower level menu.
3.
The “PLU” display appears.
Enter the PLU number and press [PLU] key
to call up the desired PLU data.
4.
The “SALE1” display appears.
Press [Edit] key to edit the PLU name.
4.
The “PLU Name Edit” screen is displayed.
Edit text according to the procedure
described in Appendix “Text Editing”.
5.
Press [Enter] to return.
Press [Enter] to call up the lower level menu.