Need help?Do you have a question about the Iso-Tech IPS 3303D and is the answer not in the manual?
General| Brand | Iso-Tech |
|---|---|
| Model | IPS 3303D |
| Category | Power Supply |
| Language | English |
Explains symbols and alerts like Warning, Caution, and Danger for safe operation.
Covers general operational rules, power supply, fuse, and cleaning precautions.
Details safe operation and storage environmental conditions, including pollution degree.
Provides specific safety instructions for connecting the power cord in the United Kingdom.
Brief introduction to the IPS X303 series and a general description of the product.
Describes Independent, Tracking Series, and Tracking Parallel modes for the power supply.
Details model variations, performance, operation, protection, and interface features.
Explains the internal working principles and block diagram of the power supply.
Details the automatic switching between Constant Voltage (CV) and Constant Current (CC) modes.
Overview of the front panel controls, displays, and indicators.
Details the operations of memory, channel selection, beep, and lock keys.
Describes output keys, voltage/current knobs, and terminal connections.
Explains indicators and output terminals for CH1, CH2, CH3, and CH4.
Details the USB connector, power cord socket, fuse holder, and AC selector.
Steps for powering on the device, selecting AC voltage, and initial setup.
Instructions for connecting load cables and guidelines for wire types.
Procedures for managing output status and configuring the beep sound.
Features for locking/unlocking the panel and switching between output channels.
Setup and operation procedures for CH1, CH2, CH3, and CH4 independent modes.
Setup and operation for CH1/CH2 tracking series mode, including common terminal usage.
Setup and operation for CH1/CH2 tracking parallel mode, including output control.
Procedure to store current configurations into the internal memory slots.
Procedure to load previously saved configurations from memory.
Configuration steps for PC communication via USB and verification methods.
Procedures for entering and exiting remote control operation via USB connection.
Explains the structure, parameters, data types, and terminators for remote commands.
Lists possible error messages and provides a summary of all available commands.
Provides in-depth explanations and examples for various remote control commands.
Step-by-step guide for safely replacing the fuse in the power supply.
Covers output ratings, voltage/current regulation, and tracking operation parameters.
Details measurement accuracy, overvoltage protection, insulation, and operating conditions.
Lists available optional equipment such as USB cables.
Addresses common user queries and problems encountered during operation.
Details the warranty period, coverage, limitations, and exclusions for the product.
To Next Page
