ITech IT8800 Series - Certification and Quality Assurance; Warranty service; Limitation of Warranty; Safety signs

IT8800 User’s Manual
Copyright © ITECH Electronic Co., Ltd. i
Certification and Quality Assurance
IT8800 series electronic load completely reaches nominal technical indicators
in the manual.
Warranty service
ITECH Company will provide one-year warranty services for the product
materials and manufacturing (excluding the following limitations).
 When warranty service or repair is needed, please send the product to the
service unit specified by ITECH Company.
 When the product is sent to ITECH Company for warranty service, the
customer must pay the one-way freight to the maintenance department of
ITECH, and ITECH will be responsible for return freight.
 If the product is sent to ITECH for warranty service from other countries,
the customer will be responsible for all the freight, duties and other taxes.
Limitation of Warranty
Warranty service does not apply to the damage caused in the following
circumstances:
 Damage resulting from customer-wired circuits or customer-supplied parts
or accessories;
 Product which has been modified or repaired by the customer;
 Damage caused by the circuit installed by the customer or damage caused
by operation of the product in non-specified environment;
 The product model or serial number is altered, deleted, removed or made
illegible by customer;
 Damage caused by accidents, including but not limited to lightning, water,
fire, abuse or negligence.
Safety signs
DC power
ON (with the power
switched on)
AC power
OFF (with the power
supply switched off)
Both DC and AC power supply
Power supply
switching-on status
Protective grounding terminal
Power supply
switching-off status
Grounding terminal
Reference terminal
Danger sign
Positive terminal
Warning sign (refer to specific
“Warning” or “Caution”
information in the manual)
Negative terminal
Ground wire connection end
sign
-
-