ITech IT8800 Series - Additional Features

Technical Specifications
Copyright © ITECH Electronic Co., Ltd. 79
protection
Overcurrent
protection
≒121A ≒1210A ≒66A ≒660A
Overvoltage
protection
≒530V ≒850V
Overtemper
ature
protection
≒85℃ ≒85℃
Specification
Short circuit
Current (CC)
≒121/110A ≒1210/1100A ≒66/60A ≒660/600A
Voltage (CV)
0V 0V 0V 0V
Resistance
(CR)
≒3mΩ ≒3mΩ ≒5mΩ ≒5mΩ
Input
terminal
impedance
1MΩ 2MΩ
Dimension
42U 42U
*1.The voltage/current input is no less than 10%FS (FS indicates the full
scope).
*2.The scope of read-back resistance is
(1/(1/R+(1/R)*0.01%+0.08),1/(1/R-(1/R)*0.01%-0.08)).
*3.The voltage/current input is no less than 10%FS.
*4.Ascending/descending slope: 10%-90% current ascending slope from 0 to
maximum current
*5.Minimum rise time: 10%-90% current rise time
*The above specifications may be subject to change without prior notice.
4.2 Additional features
Memory capacity: 100 groups.
Recommended calibration frequency: 1 time/year.
Cooling method: fan.
Fan control temperature:
Temperature 40°C 50°C 70°C 85°C
Fan status First gear Second
gear
Third
gear
Temperature protection (OH)
and load is shut off.