ITech IT8800 Series - Appendix; Specifications of Red and Black Test Lines

Appendix
Copyright © ITECH Electronic Co., Ltd. 83
Appendix
Specifications of Red and Black Test Lines
ITECH provides you with optional red and black test lines, which individual
sales and you can select for test. For specifications of ITECH test lines and
maximum current values, refer to the table below.
Model Specification Cross section Length
IT-E301/10A 10A - 1m
IT-E301/30A 30A 6mm
2
1.2m
IT-E301/30A 30A 6mm
2
2m
IT-E301/60A 60A 20mm
2
1.5m
IT-E301/120A 120A 50mm
2
2m
IT-E301/240A 240A 70mm
2
1m
IT-E301/240A 240A 70mm
2
2m
IT-E301/360A 360A 95mm
2
2m
For maximum current of AWG copper wire, refer to table blow.
AWG 10 12 14 16 18 20 22 24 26 28
The
Maximum
current
value( A)
40 25 20 13 10 7 5 3.5 2.5 1.7
Note: AWG ( American Wire Gage), it means X wire ( marked on the wire). The
table above lists current capacity of single wire at working temperature of 30°C.
For reference only.