Function and Features
Copyright © ITECH Electronic Co., Ltd. 26
NO Keep existing configurations
YES Recover all configurations to factory set
values
Power-ON
POWER-ON PARAMENT
RST(default) Set the input status of load at powering
on as "status as delivered"
SAV0 Set the input status of load at powering
on as SAVE 0 value
Buzzer
BUZZER STATE Set the buzzer status
On (default) Set the buzzer as ON status.
Off Set the buzzer as OFF status.
Knob
LOAD ON KNOB MODE Set the pulse knob
Update(default) Real-time update
Old Not update
Trigger
TRIGGER SOURCE Set triggering mode
Manual (Def) Manual trigger
External External signal trigger mode
Hold Trig: IMM valid
Bus GPIB bus trigger mode
Timer Timer trigger mode
Memory
MEMORY Operated with Recall button to recall 100
groups memories.
Group=(0-9) 0: represent group 1-10, 1
11-20, and so on.
Displ
DISPLAY ON TIMER Screen displays loading time
On Start function
Off (default) Stop function
Communication
COMMUNICATION Select the interface for communication
with a computer
RS232
After interface entry, press the
Arrow
configuration
4800, 8, N non parity check, 1, NONE
9600 E even parity check CTS/RTS
19200 O odd parity check XON/XOFF
38400
57600
115200
USBTMC
GPIB Address (0-31)
Protocol
PROTOCOL
SCPI (Default) SCPI protocol
Extend-Table Expand SCPI protocol for compatibility of
other machines
To Next Page
Loading...
